Mini Cooper Nightmare

Mini Cooper - This Mini was a bit of a surprise. We figured it would be an 8 hour job. How bad could it possibly be, it's such a small car. The customer asked for paint correction services and the interior to be cleaned....he then added he would like the wheels pulled off/detailed and the wheel wells detailed as well. Okay when we got the car it was something else.......take a look what a disaster! Products Used: Exterior: Einszett Blitz in the Cam Spray Foam Canon Adam's Gray Clay Bar and Optimum Instant Detail Spray and Gloss Enhancer for clay lube Menzerna Power Gloss Compoune Menzerna Super Intensive Menzerna PO85RD Menzerna Top Inspection Einszett Glanz Wheels/Wheel Wells/Tires/Engine Uber Wheel/Tire/Wheel Well Kit Interior: Leather Master Strong Cleaner Leather Master Vital Leather Master Protection Cream Einszett Deep Cleaner Einszett Gummi Adam's Glass Cleaner Dressing on Trim Black Wow Tools: Infratech 5300 Fenix TK11 3M Sun Gun Brinkmann MaxFire Metabo PE12-175 Flex 3403 Makita 9227 Hi Speed Rotary The Uber Foam Pads (5.5inch) Tons of "Uber" Microfiber Towels Uber Drying Towels Cam Spray 1500A with Cam Spray Foam Gun Before shots: Wheels That wasn't so bad........let's start with the interior detail. Interior before shots: --- Dog hair???? no one said anything about dog hair... So how in the world do we attack this interior. After careful thought, we decided to pull the rear bench out as well as the front seats. Ugh the seats! Time to pull them out Hair was everywhere The rear bench So what do we have underneath the bench Dirt, dirt, and more dirt... Tommy on the vac Driver's area More vacuuming Time to pull the front seats out (battery was disconnected) Tommy pulling out the driver's side Dan assisting Tommy on the seat removal Under the driver's seat More hair! Cleaned up Bench back in, Tommy finishing them up Seat out, cleaned/conditioned/protected Passenger seat being put back in Final shots of the interior Door jamb before Door jamb after Now to the exterior: Starting with the engine start to finish: Before shot of the engine Dan on the P21S Brushing/Agitating all the built up grease, grime, and dirt Rinsing down the engine bay Engine wipe down Final shots of the engine: Wash - Paint correction - Wheels - Wheel Wells The presoak Foaming and washing down the car Washing down the car with an Uber Sponge Wheels on the car getting P21S on tires and wheels, wheel wells pressure washed Claying the car PG with the Makita and the Uber Yellow Checking the paint with a Fenix TK11 Before shots of the hood/50/50 shot of the hood The roof was a mess we did as much as we could on it without wet sanding, scratches were pretty deep, take a look Under the Sun Gun After PG and SIP After PO85RD Polishing out the bumpers We put the car on jacks to move on to the wheels and wheel wells Wheels Dan and I claying the wheels Cleaning up the wheel wells Dressed up in Adam's Undercarriage Spray Finished wheel wells Finishing touches Black wow on the trim After shots inside and out I hope you enjoyed this one. We look forward to your comments