Nanolex Scrub (PPF & Wrap) 750ml

Paint Protection Film (PPF) and vinyl wraps require special care. Nanolex Scrub (PPF & Wrap) has been specifically developed for these surfaces to remove tough dirt and discoloration without damaging the delicate structure of the film.

• Removes baked-on insect remains & road film
• Gentle on PPF and glossy/matte films
• Ideal for clear PPF and tinted films
• Does not affect the film structure

Attention: Nanolex Scrub (PPF & Wrap) does not remove scratches – it is not a polishing agent, but it may affect existing sealants, waxes, and coatings! Always test on an inconspicuous area first.

Instructions for Use:

1. Preparation: Clean the PPF or vinyl wrap with a pH-neutral shampoo or mild cleaner and dry it thoroughly.
2. Application: Apply a small amount of Nanolex Scrub (PPF & Wrap) to a soft microfiber cloth or foam pad and work it over the affected area using light to medium pressure in straight-line movements to loosen any discoloration or dirt.
3. Residue Removal: Wipe off with a damp microfiber cloth and allow to dry.
4. Check: If necessary, repeat the process, but avoid excessive rubbing to prevent damage to the film.

Nanolex Scrub (Wheel) – Maximum Cleaning Performance for Wheels

Removes even the most stubborn dirt, yellowing, and baked-on brake dust.

Wheels are exposed to extreme conditions – baked-on brake dust, road grime, and discoloration require intensive cleaning. Nanolex Scrub (Wheel) has been specifically designed to tackle these challenges, combining chemical cleaning power with mechanical deep-cleaning technology to restore wheels to their original condition.

• Dissolves baked-on brake dust & metal particles

• Removes yellowing & discoloration

• Ideal for painted, polished, and anodized rims

• Heavy-duty performance with maximum cleaning power

Instructions for Use:

1. Preparation:

• Clean the rims with a suitable rim cleaner (e.g., Nanolex Wheel Cleaner & Iron Remover).

• Rinse thoroughly and dry.

2. Application:

• Apply a small amount of Nanolex Scrub (Wheel) to a microfiber cloth, foam pad, or soft brush.

• Work into the affected area using light to medium pressure in circular or straight-line motions.

3. Residue Removal:

• Wipe off with a damp microfiber cloth or rinse with a pressure washer.

4. Check:

• Repeat if necessary – older deposits may require multiple treatments.