Auto Finesse Desire Carnauba Wax

$ 179.95

Auto Finesse Desire started life as a limited edition paste wax that crowned our line in 2011, but after all 500 pots were sold our customers simply wouldn’t allow it to be consigned to the history books. Back by popular demand, Desire once again stands tall alongside some of the most exclusive waxes that the world has to offer. With the highest carnauba solids content of all Auto Finesse waxes, and a unique melding of beauty and performance, this Desire is simply too good to let slip away…

All Auto Finesse waxes are carefully blended by hand in Great Britain from the finest quality natural ingredients available, and bring with them the same philosophy of performance and beauty as the rest of our detailing products. The waxes we use treat your vehicle with nature’s own defense against the elements, giving it water repellency, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings.). Let’s take a look at what else makes Auto Finesse Desire special…

Auto Finesse Desire contains 54% T1 Grade Brazilian Carnauba Wax by volume, with the remainder being made up by all natural Beeswax, and oils.

With Passion’s liquid depth, Spirit’s optical clarity, and Soul’s glassy reflections blended together, Desire represents the ultimate Auto Finesse wax experience.

An ultra-high wax solids content gives Desire up to and exceeding 6-months of durability on a daily driven vehicle, which means all-year, all-season protection for your pride and joy.

Desire’s awesome water beading and sheeting is almost hypnotic to watch during a rain, as the drops turn into tight little balls, and speed off the paint leaving it clean and spot free.

An intoxicating wild berry aroma, an oily smooth texture that spreads for miles, and effortless buffing characteristics make this the Auto Finesse wax that everyone Desires.

Whether your car or motorcycle has a modern clearcoat, or a classic single-stage paint system, Auto Finesse waxes will give it the protection it needs to survive the realities of everyday life. For the detailing professional or dedicated weekend enthusiast, there simply is no finer way to complete your flawless Auto Finesse style finish.

Before waxing, make sure that the vehicle is clean, and cool to the touch. If bonded contamination is present, use a Clay Bar to prep the surface for best results. If the paintwork is lightly marred, or the vehicle has not been polished in the last 6-12 months, it is also advisable to use one of our signature Pre-Wax Cleansers in order to create the maximum shine. Place an Auto Finesse Waxmate foam applicator inside the pot of wax, and rotate it half a turn to prime the pad with product. This is typically enough wax to protect a single moderately-sized panel, though this may vary depending upon the condition of the paintwork. Apply the wax to the panel with small, overlapping circular strokes, light pressure, and in a consistent pattern to obtain full coverage of the paint. If the applicator feels like it is starting to run dry across the surface, or coverage becomes uneven, return the applicator to the container using another quarter-turn of the pad to re-prime the foam. The goal when waxing is to apply the product as thinly and evenly as possible, since a little bit goes a very long way to protecting and enhancing the shine of your vehicle.

Once you have completed one normal-sized panel, or half of a large one, move on to another section of equal size. When you are done waxing the second section, you will be ready to buff off the wax from the first using a plush Microfiber Towel. Alternating in between buffing and waxing panels until the vehicle is fully protected allows you to maintain the ideal curing times for the wax, and makes for very easy removal of the remaining residue. Auto Finesse Desire only takes a few minutes to cure, so take care not to let the product dry onto the surface. If the wax has been allowed to dry, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based QD like Auto Finesse Finale to help ease removal of the residue. When applying multiple layers of wax for extra depth, wetness, and protection, make sure to wait at least 3-hours in between coats to allow the organic solvents to fully flash.

Do not wax the vehicle if the ambient temperature is below 6-degrees Celsius, or above 35-Degrees Celsius.

Waxing in direct sunlight, or conditions of high humidity, can respectively lead to over or under-curing of the product before removal.

For best results, do not wax the vehicle if the ambient temperature is below (Approximately 6-degrees Celsius), or above 95-degrees Fahrenheit (35-Degrees Celsius). Waxing in direct sunlight, or conditions of high humidity can respectively lead to over, or under-curing of the product before removal.

Storage

Store Desire in a cool environment, out of direct sunlight, with the lid firmly installed for maximum shelf life. This applies to all Auto Finesse car care products, but is especially important with our signature waxes.


Related Items


Please select a wishlist category