Hydro Wash is a recommended prep step to Hydro Seal. It produces a generous amount of suds and smells amazing. Although any non-polymer soap will work fine to prep for Hydro Seal, Hydro Wash was designed specifically as a prep for the Hydro Seal.

Hydro Wash is an excellent auto shampoo in its own right too!

Prima Hydro

Prima Hydro is a remarkably durable wax-as-you-dry spray. The polymer structure means your vehicle's finish is left glossy, slick and well-protected. Hydro is so high in polymer that it actually cures over time. 24 hours later you'll have an even slicker and glossier finish! You'll be amazed at how well it repels dust too.

To use, simply wash your car normally then rinse. While the car is still wet, spritz Hydro on the surface. Dry normally with any fabric drying towel (ie, microfiber waffle weave). That's it! This versatile product can also be used as a quick detailer on a dry surface with a plush microfiber cloth. It's so simple. Why wax when you can Hydro?

Please note the gallon sizes are sold as refils without sprayer.

Prima Hydro Seal

Hydro Seal is a water-activated polymer sealant. Simple wipe-on, wipe-off application will yield months of protection with a rich, organic shine. Hydro Seal will not stain or discolor trim. It is safe to use on any non-porous surface.

While the application is unique, it is also extremely easy, especially for a product so durable. Thorough testing has proven a reliable 6-8 months. It has a wet, luscious look with remarkable depth. It doesn't have the "sterile" shine of many synthetics and yet is different from the look of a carnauba. The water beading is very tight, dense and stays consistent wash after wash. It can be applied over traditional synthetics such as Prima Epic. It can also be applied over Prima Amigo or Hydro. Prima Hydro Seal can be immediately layered if desired.

See the Hydro Wash as a prep agent for the Hydro Seal.

Directions:

Start with 2 plush microfiber towels and a spray bottle of water.

Apply to a clean car, out of the direct sun. Soak one plush microfiber towel with water then wring out excess water so towel is lightly damp. Fold it in fourths. Spread a quarter-sized dollop on the wet towel. Mist a section of paint with water. Wipe Hydro Seal onto the paint until it begins to disappear. Any remaining Hydro Seal is immediately ready for removal. Wipe any residue from the paint with your dry towel. Continue to the next section. Feel free to follow with original Hydro or add a layer of Hydro Seal.

Note that although it can be applied over Epic, Amigo or Hydro, the car should be wet-wiped after polishing (Finish, Swirl, Cut), prior to applying Hydro Seal.

Note also that polymer-based soaps, such as Mystique should not be used before Hydro Seal. This is why we created Hydro Wash.