NanoSkin Autoscrub Fine Grade 6 inch Pad

0 item(s)
Total: $0.00

Home > EXTERIOR CAR CARE > Detailing Clay Bar & Clay Lubricants

Share |

Pin It

NanoSkin Autoscrub Fine Foam Pad 6 Inch

Item Id: AS-001-Fine

3 Review(s)

Write a Review

Retail Price: $59.95
Your Savings: $5.00
Your Price: ~~$59.95~~ On sale: $54.95

Availability:

In Stock

Quantity

Add to Gift Registry

Email a friend

Add to Wish List

Description

NANOSKIN Autoscrub Fine 6 inch Pad - Better and Faster than Claying

Now you have a choice of the Original NanoSkin Autoscrub Pad or the Fine Pad Option. If you have a newer car or one that does not need much the Fine Pad will be the right way to go.

Wow is all I can say about this new tool and new technology. I believe this will change the way most pro detailers and DIYers will prep their cars. This is truly a time saver and will pay for itself after a couple detail jobs. We have spent in some cases 1-2 hours claying and prepping a midsize sedan (in rough shape) we recently tested the AutoScrub on an Audi S8 and we were finished in about 15 minutes! You really won't believe this until you try it yourself. The AutoScrub will make you leave your clay bar behind.

NANOSKIN AutoScrub works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.

A dual action orbital polisher is required. AutoScrub will safely and easily removes paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic.

AutoScrub works great with your favorite detail spray or clay lubricant. Unlike the clay bar, the AutoScrub can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AutoScrub on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it.

AutoScrub allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

Features
- Lasts up to 4 times longer than clay bars
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
- Up to 50-60 uses before you need to replace it

Directions
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Mist sufficient detail spray or clay lubricant onto the surface evenly. (on this I would suggest the more the better)
3. Polish the surface with dual action orbital polisher using light pressure (Low Speed - we have found speed 1-2 on the Porter Cable to work well and speed 1 on a Griots Orbital Polisher works well.)
4. Wipe off residue and move on to compound and polishing or even go straight to your last step.

Important tips:
- Make sure you break the pad in first on the windshield or glass. What we like to do is on the first use or in general start with the glass first then move on to the paint.
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- DO NOT use water
- DO NOT use with rotary polisher.

Customer Reviews

	Faster and Easier than Clay
	I first saw/got to use this when I had a friend help opticoat my car. I could not believe how fast each pannel was decontaminated. I always though these would impart some marring to the paint, but to my surprise, there was none. The key it to keep the surface of the pad clean and lubricated. We cleaned it between pannels. For now, clay is reserved only for very tight, tough to get to areas. I have purchased my own and have had great results.
	Reviewed by: Jeff from Long Island, NY. on 8/23/2012

	It'sLlike Magic
	Honestly, I don't understand how the AutoScrub works, BUT IT DOES. Very well. I've been recommending the system to anyone who even mentions washing their car. I really appreciate how the fine pad doesn't mar my paint.
	Reviewed by: James A Mitchell Jr from Connecticut. on 8/2/2012

	works well
	This product works very well but it MUST be broken in well. I have found that i have to use on the glass 2x before touching the paint. If not broken in well you will be creating a lot more work for yourself as it creates a lot of holograming.
	Reviewed by: Jake B from NJ shore. on 7/13/2012